转速传感器：
选择转速传感器。没有选择，该功能将被禁用，如果有连接传感器，则如图。
每圈长度:
设置旋转一圈行程。该距离用于计算虚拟速度和里程表传感器。
点击 "每圈长度"，设置模型每圈的能走的距离 (单位：毫米)，点击返回即可，如图
21.59
：
(
Pic 21.58)
(
Pic 21.59)
Speed sensor:
Select the rotation speed sensor to use. If none is selected, this function is disabled.
Set rotation length:
Set the model travel distance corresponding to one rotation speed sensor. This distance is
used to control the virtual speed and odometers sensors.
Touch "Set rotation length" to set distance traveled by the model in one revolution of wheel
(Unit: mm), As shown in
Picture 21.59, touch back button to return.
复位里程表：
点击
“复位里程表
1
”或“复位里程表
2
”，可用于清零相应的里程表内的数值。
里程表
1
：作为单次里程表，记录每次使用时模型车跑的里程。
里程表
2
：作为总里程表，累计记录所有的里程。
(
Pic 21.60)
Reset odometer:
Touch "Reset odometer 1” or “Reset odometer 2" to reset the corresponding odometer.
Odometer 1: It is used for recording the distance traveled by the vehicle one time.
Odometer 2: It is used for recording total distance traveled by the vehicle.
41
Digital proportional radio control system
