TSI Instruments DustTrak 8535, Руководство по эксплуатации и обслуживанию

Страница: 38 / 70

28 Chapter 2
Figure 27: Install the Solar Battery and Connect to Controller
2. The next step is to attach the provided power cables with
waterproof connectors to each Solar Cell.
Remove the Solar Cell from its packaging and access the junction
box on the end of the panel. Remove the screws and sealing strip
from inside the box and set aside. Remove the center of one of
the access holes which is labeled 1/2
”. Pass the power cable
through that access hole while attaching the individual pieces of
the cable strain relief, as shown in Figure 28.
Figure 28: Strain Relief and Power Cable through Access Hole