Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800
www.CRU-DataPort.com
RJR400
Removable 4-Bay SATA 3Gb/s Drive Enclosure
Front Panel
Carrier Eject:
Push to eject carrier from the receiving frame (Figure 3).
Safety Lock:
The safety lock assures proper seating of the drive
carrier within the receiving frame and prevents accidental ejection of
carrier. To lock, turn button 90° clockwise until horizontal. To unlock,
turn button 90° counterclockwise until vertical.
Power Switch (HD1 - HD4):
Each drive carrier has its own power switch.
Drive Activity LED (HD1 - HD4):
Each power switch acts as a Power
and Drive Activity LED.
NOTE:
Drive Activity LED features supported by RJR400 Rev. C00
and up (rev. level can be found on P/N label located on the unit).
Steady GREEN glow indicates power ON.
Flashing AMBER indicates drive activity.
Fan LED:
GREEN indicates normal fan operation. RED indicates fan
failure.
Overtemp LED/Reset:
Flashing RED indicates overtemperature
conditions (default is 60° C) and a audible alarm will sound. Pushing
this switch will reset Overtemp LED back to Green, as well as turn off
audible alarm.
Figure 2: Rear Panel
REAR PANEL
DC Power Connectors:
Standard 4-pin DC Power Connector to
accept DC power.
NOTE:
If using DC power, both DC power connectors
must be provided with power for proper operation.
SATA Power Connectors:
Alternative 15-pin SATA Power Connector
to accept DC power.
NOTE:
If using SATA power, both power connectors
must be provided with power for proper operation.
I/O Connectors:
The input/output connector provides a standard
interface for all SATA signals.
Temperature Setting (JP1):
Jumper set to 60
o
C overtemperature
(default).
Reserved (JP3):
Factory-reserved.
Fan Speed:
High (recommended) and low speed. Jumper is set to
High (default).
NOTE:
Fan speed feature supported by RJR400 Rev. C00
and up (rev. level can be found on P/N label located on
the unit).
Cooling Fan:
Fan provides enhanced heat dissipation (53.9 CFM).
Figure 1: Front Panel
Carrier
Eject
Power Switch
& Power/Drive
Activity LED
OverTemp LED
& Reset
Carrier Handle
Safety
Lock
Fan LED
Temperature Setting (JP1)
DC Power Connectors
Cooling Fan
I/O
Connectors
Reserved
(JP3)
SATA
Power
Connectors
Fan Speed
