Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800
www.CRU-DataPort.com
Product Warranty
CRU-DataPort (CRU) warrants the Data Express RJR400 to be free
of significant defects in material and workmanship for a period of
five years from the original date of purchase. CRU’s warranty is
nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other war-
ranties. CRU expressly disclaims all other warranties, including but
not limited to, the implied warranties of merchantability and fit-
ness for a particular purpose and non-infringement of third-party
rights with respect to the documentation and hardware. No CRU
dealer, agent or employee is authorized to make any modifica-
tion, extension, or addition to this warranty. In no event will CRU
or its suppliers be liable for any costs of procurement of substi-
tute products or services, lost profits, loss of information or data,
computer malfunction, or any other special, indirect, consequen-
tial, or incidental damages arising in any way out of the sale of,
use of, or inability to use any CRU product or service, even if CRU
has been advised of the possibility of such damages. In no case
shall CRU’s liability exceed the actual money paid for the products
at issue. CRU reserves the right to make modifications and addi-
tions to this product without notice or taking on additional liability.
Certification
EMI Standard: FCC Part 15 Class B, CE
EMC Standard: EN55022, EN55024
FCC Certification
This device has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. Operation is subject to the following two condi-
tions:
1. This device may not cause harmful interference.
2. This device must accept any interference received;
including interference that may cause undesired operation.
Register your product at www.CRU-DataPort.com
Rev. 1.1
Installation
NOTE:
A #2 Phillips screwdriver will be required.
1. Eject carrier from the receiving frame (Figure 3).
2. Carefully insert drive (not included) into the carrier. Turn
the drive/carrier assembly over.
3. Bottom-mount the drive into the carrier with four (4)
Phillips screws (Figure 4).
Push to Eject
Carrier
Insert SATA Drive
(not included)
Bottom-Mount
Drive
Figure 4: Installing a Drive into the Carrier
Figure 3: Ejecting the Carrier
