TSI Instruments DustTrak 8535, Руководство по эксплуатации и обслуживанию

Страница: 24 / 70

14 Chapter 2
Install Impactor in the Sample Flow
(optional accessory)
Optional Impactors are available as accessories to the
DustTrak
™ II/DRX aerosol monitor. These Impactors can be placed
in the Sample Flow in the Environmental Enclosure system as
detailed below.
NOTE
Refer to the DustTrak
™
II/DRX aerosol monitor manual for
Impactor usage and maintenance information.
1. Remove the Inlet Fitting from the water bottle mount.
2. Insert the Impactor in the water bottle mount in its place.
3. Then insert the Inlet Fitting in the other end of the Impactor as
shown in Figure 9.
Figure 9: Install Impactor in the Sample Flow
Install Thiamis 1000 GSM/GPS Communication
Modem
(optional accessory)
Installation documentation found in the quick start document shipped
with each optional accessory (P/N 6007817).
Install Heated Inlet Sample Conditioning Module
(optional accessory)
Installation documentation found in the quick start document shipped
with each optional accessory (P/N 6007667).