TSI Incorporated 8525, Руководство по эксплуатации и обслуживанию

Страница: 51 / 67

Maintenance
43
Each new wick has a new screen with it. Note that some discoloration is
normal and will not influence performance.
Removing the Wick from the Cartridge
To remove the alcohol wick from the cartridge, grasp the cartridge with
both hands, with your thumbs near the seam, and firmly apply pressure
as if you wanted to break it into two pieces. The cartridge will snap
apart exposing the end of the white Alcohol Wick. See Figure 4-1.
Figure 4-1: Snap Apart Cartridge
After separating the two halves, push the alcohol wick and screen out of
the wick retainer cap from the opposite end with the wick removal tool
(wood dowel) provided with each new alcohol wick. Do
not use a
pencil point because bits of lead could break off. Allow the small,
circular, fine-mesh screen to fall out on the table. See Figure 4-2.
Figure 4-2: Remove Wick and Screen Using Dowel