TSI Incorporated 8525, Руководство по эксплуатации и обслуживанию

Страница: 34 / 67

Chapter 3
26
Single Point Statistics
The Single Point Statistics screen allows you to review a
statistical summary of each recorded single data point. When
the screen is first displayed, it will show the information for the
most recent single data point. You may page through and
review the information for each recorded point. A sample
screen is shown below.
-SINGLE POINT STATS-
LOCATION 01
3760 PT/CC
08:22:34 11/02/2008
PRESS
↵
WHEN DONE
Figure 3-7: Single Point Statistics
Log Interval
The Log Interval menu allows you to view the current logging
interval used during LOG MODE 1 (see “
Log Mode 2 and 3 ”
section, later in this chapter, for more information about data
logging). It also allows you to adjust the log interval to a different
value. The menu screen is shown below.
-LOG INTERVAL-
01:00
MIN:SEC
Figure 3-8: Log Interval
The default values for log intervals are set at 1 second, 1 minute,
5 minutes, 15 minutes and 30 minutes. When “
↵
” is pressed, the
program retains the current setting and returns to the Setup menu.
The log interval is both a frequency and an averaging period. For
example, when the log interval is set to 5 minutes, readings will be
recorded at 5-minute intervals. Each reading will be the average
value measured over that 5-minute interval.