TSI Incorporated 8525, Руководство по эксплуатации и обслуживанию

Страница: 64 / 67

Appendix B
56
6 - REACTIVITY DATA
Stability................................ Stable, hazardous.
Polymerization ..................... Will not occur.
Conditions to Avoid............. Heat, flame, other sources of ignition.
Incompatibles....................... Strong
oxidizing agents, aluminum, nitric
acid, sulfuric acid, amines and ammonia,
halogen acids and halogen compounds.
Decomposition products ...... Carbon monoxide, carbon dioxide.
7 - SPILL AND DISPOSAL PROCEDURES
Steps to be Taken in the Event of a Spill or Discharge:
Wear suitable protective clothing. Shut off ignition sources; no flares,
smoking, or flames in area. Stop leak if you can do so without risk. Use
water spray to reduce vapors. Take up with sand or other non-combustible
absorbent material and place into container for later disposal. Flush area
with water.
J. T. Baker SOLUSORB
®
solvent adsorbent is recommended for spills of
this product.
Disposal Procedure:
Dispose in accordance with all applicable federal, state, and local
environmental regulations.
EPA hazardous waste number: D001 (ignitable waste)
8 - PROTECTIVE EQUIPMENT
Ventilation:
Use general or local exhaust ventilation to meet TLV requirements.
Respiratory Protection:
Respiratory protection required if airborne concentration exceeds TLV. At
concentrations up to 1000 ppm, a chemical cartridge respirator with organic
vapor cartridge is recommended. Above this level, a self-contained breathing
apparatus is recommended.
Eye/Skin Protection:
Safety goggles, uniform, apron, neoprene gloves are recommended.