TSI Incorporated 8525, Руководство по эксплуатации и обслуживанию

Страница: 41 / 67

Operation
33
The following table summarizes the information displayed in the
P-T
RAK
® particle counter Logging Protocol dialog box.
Item Description
Serial Number Displays the serial number of the P-T
RAK
®
particle counter.
Number of tests
logged Displays the number of tests currently logged
and stored in the logging instrument.
Available Memory % Displays the percent of available memory in
the P-T
RAK
®
particle counter (data logging
only; single point memory is not included in
this total).
Channels Displays the channels selected for sampling in
LOG 2 and LOG 3 modes (for the P-T
RAK
®
particle counter, this is limited to particle
concentration).
Start Date Displays the start date for LOG 2 and LOG 3
modes.
Start Time Displays the start time for LOG 2 and LOG 3
modes.
Log interval Displays the log interval for LOG 2 and LOG 3
modes.
Test length Displays the test length for LOG 2 and LOG 3
modes.
Number of tests Displays the number of tests for LOG 2 and
LOG 3 modes. Selecting more than one test
will cause the instrument to cycle through the
logging test more than once, separated by the
“Time Between Tests.”
Time between tests Displays the time between tests for LOG 2 and
LOG 3 modes.
Percent memory
required Displays the percent of logger memory
required to perform a LOG 2 or a LOG 3 mode
sample. To store the results of a LOG 2 or
LOG 3 mode sample, the Available Memory
must be equal to or greater than the Percent
memory required.