TSI Incorporated 8525, Руководство по эксплуатации и обслуживанию

Страница: 32 / 67

Chapter 3
24
Changing the Location Label
Once you choose to save the data point in memory, the P-T
RAK
®
particle counter displays the EDIT LOCATION screen. The
instrument gives the data point a default name, starting with
“LOCATION 01.” The following screen is displayed.
-EDIT LOCATION-
LOCATION 01
PRESS
↵
TO EXIT
Figure 3-4: Edit Location Label, Single Data Point
If you press “
↵
”, the instrument will save the data point with the
default Location Name (in this case, “Location 01”). If desired, you
may change the Location name, up to a maximum of 15
alpha/numeric characters. When done editing, press “
↵
” to exit
and save. The instrument will return to the Survey mode.
Setup Mode
The Setup mode gives you access to a wide range of options for
reviewing data, examining statistics and changing operational
parameters. When SETUP is selected and “
↵
” is pressed, the program
opens the Setup menu, as shown below:
STATISTICS
LOG INTERVAL
AUDIO
TIME/DATE
BACKLIGHT
CLEAR MEMORY
EXIT
Figure 3-5: Setup Menu
Statistics
The STATISTICS selection gives you access to a sub-menu, which
provides a choice of either Logged Test Statistics or Single Point
Statistics.