TSI Incorporated 8525, Руководство по эксплуатации и обслуживанию

Страница: 15 / 67

7
Chapter 2
Setting Up
Supplying Power to the P-T
RAK
®
Particle Counter
The Model 8525 P-T
RAK
®
Ultrafine Particle Counter may be powered in one
of two ways. The standard configuration instrument is sold with a battery
holder containing 6, AA alkaline batteries. An optional AC adapter may also
be used to power the instrument when operating in a fixed location.
Installing the Batteries
To install the battery holder, first install the 6 individual AA batteries
into the pack, noting the battery polarity as marked on the inside of the
battery holder. Remove the battery compartment door by pressing in and
pulling out on the two locking tabs. Next, install the battery pack
(battery side down) into the battery compartment as shown in
Figure 2-1, putting the top of the pack (the side with the two contacts
extending from the body of the pack) down first and snapping the rest of
the pack in place. Finally, replace the battery compartment door.
Figure 2-1: Install Battery Pack into Battery Compartment
CAUTION
!
Avoid forcing the battery pack into place. The
battery pack fits correctly in only one orientation.
When installed properly, the batteries will face
down into the compartment.