Bezique
To adjust the shower temperature
The water temperature is altered by increasing
or decreasing the flow rate of the water through
the shower via the temperature control
(fig.)
.
After finding a suitable showering temperature,
the number can left as the normal setting and
should only need altering to compensate for
seasonal changes in ambient water temperature.
Note:
The preferred number on ‘economy’ will
give a different temperature to the same number
position on ‘high’.
To decrease the shower temperature
Turn the temperature control anti-clockwise;
this will increase the flow of water through the
shower and is indicated by lower numbers.
To increase the shower temperature
Turn the temperature control clockwise; this will
decrease the flow of water through the shower
and is indicated by higher numbers.
Note:
It is advisable to be certain that the
showering temperature is satisfactory by testing
with your hand before stepping under the
showerhead. There will always be a time delay of
a few seconds between selecting a flow rate and
the water reaching the stable temperature for
that flow rate.
cAutIoN:
It is recommended that persons
who may have difficulty understanding or
operating the shower controls should not
be left unattended while showering. Special
consideration should be given to young
children and the less able bodied.
WARNING!
After any servicing of mains water
supply, always make sure the unit is
started on cold in order to purge
any air in the pipework.
