Bezique
9
After choosing the site for the shower, use the
backplate as a template and mark the two fixing
holes
(fig.)
.
Drill and plug to suit the fixing screws supplied.
(The wall plugs provided are suitable for most brick
walls — use an appropriate masonry drill, but if the
wall is plasterboard or a soft building block, you
must use suitable wall plugs and an appropriate
drill bit).
Screw top fixing screw into position leaving the
base of the screw head protruding 6mm out
from the wall.
Hook the backplate over the top screw and fit
the bottom fixing screw into position. Do not
fully tighten the screws at this stage, as the fixing
holes are elongated to allow for out of square
adjustment after the plumbing connections have
been completed.
20mm
remove
View from
rear of backplate
Fig.
Fig.0
Fig.
