manualshive.com logo in svg

Trio JR240, Руководство пользователя, Страница: 3 / 76

Поделиться
Скачать
Trio JR240 Скачать руководство пользователя страница 3

Page  3  

J-Series Data Radio – User Manual

Part A - Preface

Part A – Preface

Warranty

All equipment supplied by Trio DataCom Pty Ltd (As of 1 January 

2009) is covered by warranty for faulty workmanship and parts 

for a period of three (3) years from the date of delivery to the 

customer. During the warranty period Trio DataCom Pty Ltd shall, 

at its option, repair or replace faulty parts or equipment provided 

the fault has not been caused by misuse, accident, deliberate 

damage, abnormal atmosphere, liquid immersion or lightning 

discharge; or where attempts have been made by unauthorised 

persons to repair or modify the equipment. 
The warranty does not cover modifications to software. All 

equipment for repair under warranty must be returned freight paid 

to Trio DataCom Pty Ltd or to such other place as Trio DataCom 

Pty Ltd shall nominate. Following repair or replacement the 

equipment shall be returned to the customer freight forward. If it is 

not possible due to the nature of the equipment for it to be returned 

to Trio DataCom Pty Ltd, then such expenses as may be incurred 

by Trio DataCom Pty Ltd in servicing the equipment in situ shall be 

chargeable to the customer.  
When equipment for repair does not qualify for repair or 

replacement under warranty, repairs shall be performed at the 

prevailing costs for parts and labour. Under no circumstances shall 

Trio DataCom Pty Ltd’s liability extend beyond the above nor shall 

Trio DataCom Pty Ltd, its principals, servants or agents be liable 

for the consequential damages caused by the failure or malfunction 

of any equipment.

Important Notice

© Copyright 2008 Trio DataCom Pty Ltd All Rights Reserved

This manual covers the operation of the J-Series of Digital Ethernet 

Data Radios. Specifications described are typical only and are 

subject to normal manufacturing and service tolerances.
Trio DataCom Pty Ltd reserves the right to modify the equipment, 

its specification or this manual without prior notice, in the interest 

of improving performance, reliability or servicing. At the time of 

publication all data is correct for the operation of the equipment 

at the voltage and/or temperature referred to. Performance data 

indicates typical values related to the particular product.
This manual is copyright by Trio DataCom Pty Ltd. All rights 

reserved. No part of the documentation or the information supplied 

may be divulged to any third party without the express written 

permission of Trio DataCom Pty Ltd.

Same are proprietary to Trio DataCom Pty Ltd and are supplied 

for the purposes referred to in the accompanying documentation 

and must not be used for any other purpose. All such information 

remains the property of Trio DataCom Pty Ltd and may not be 

reproduced, copied, stored on or transferred to any other media or 

used or distributed in any way save for the express purposes for 

which it is supplied.
Products offered may contain software which is proprietary to Trio 

DataCom Pty Ltd. However, the offer of supply of these products 

and services does not include or infer any transfer of ownership 

of such proprietary information and as such reproduction or reuse 

without the express permission in writing from Trio DataCom Pty 

Ltd is forbidden. Permission may be applied for by contacting Trio 

DataCom Pty Ltd in writing.

FCC Compliance Notices

FCC Part 15 Notice

 

This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions: (1) this device may 

not cause harmful interference, and (2) this device must accept 

any interference received including interference that may cause 

undesired operation.
This device must not be modified in any way or FCC compliance 

may be void. 

FCC Approved Antennas

 

This device can only be used with Antennas listed in Appendix I 

of this J-Series User Manual. Please Contact Trio Datacom if you 

need more information or would like to order an antenna. 

RF Exposure

 

To satisfy FCC RF exposure requirements for mobile transmitting 

devices, a separation distance of 26 

cm or more should be 

maintained between the antenna of this device and persons during 

device operation. To ensure compliance, operations at closer 

than this distance is not recommended. The antenna used for this 

transmitter must not be co-located in conjunction with any other 

antenna or transmitter.

MAXIMUM EIRP

FCC Regulations allow up to 36 dBm effective isotropic radiated 

power (EIRP). Therefore, the sum of the transmitted power (in 

dBm), the cabling loss and the antenna gain (in dBi) cannot exceed 

36 dBm.
FCC Point to Point : More EIRP may be allowed for fixed point to 

point links. With the transmitter set to 27dBm, an antenna gain 

(subtracting cable loss) of up to 15 dBi is allowed. For antenna 

gains of more than 15 dBi in a fixed point to point link, the power 

must be backed off from 27dBm by 1dB for every 3dB the antenna 

gain exceeds 15dBi. 

Australian Compliance Notices

MAXIMUM EIRP

ACMA Regulations allow up to 30 dBm (1 Watt) of effective 

isotropic radiated power (EIRP) in the 915MHz license free band 

and 36 dBm (4 Watts) of EIRP in the 2.4GHz band. Therefore, the 

sum of the transmitted power (in dBm), the cabling loss and the 

antenna gain cannot exceed the above stated EIRP limits.

EU (ETSI) Compliance Notices

RF Exposure

2.4GHz Model : To satisfy EU (ETSI) requirements, a separation of 

3cm should be maintained between the antenna of this device and 

persons during operation. 

MAXIMUM EIRP

ETSI Maximum EIRP for the 2.4GHz band is +20dBm.

SAFETY

Warning: Where a JR240 is to be operated above 65

o

C ambient, it 

must be installed in a restricted access location.

Содержание JR240













































































Отзывы:

Нет отзывов