The display can be turned off with the remote controller in two stages. When you first
press the display button on the
Director
the display (
5
) will switch off. In the
second pressing, the volume indicator (
4
) will switch off. A new key operation
switches both displays (
4
and
5
) on again.
(
5
)
Display
:
The display gives you information about the different operating states of the
Epilog
.
It can switch off by the remote controller
Director
,
if you only want to see
information when you make a change.
(
6
)
Button Menu up
Use this button to navigate through the setup menu. Refer also to Chapter 3.4
(
7
)
Button Input Selection
With this key you can dial down the input module. In addition, this key also navigates
in the settings menu. Read more details about that in Chapter 3.4.
(
8
)
Button Input Selection
With this button you can select the input module upward. In addition, this key also
navigates in the settings menu. Read more details about that in Chapter 3.4.
(
9
)
Button
When this button is pressed, the MONO function is turned on. Another push switches
back to STEREO.
(
10
)
Button Menu down
Use this button to navigate through the setup menu. See also Chapter 3.4.
NOTE:
There will probably be in the future modules that rely on the keys (
6, 7, 8, 9,
10
). For details, refer then to the descriptions of the modules.
(
11
)
LED PHONES
This LED is lit when the speaker relays are switched off in the menu [OFF] so you
can enjoy the music through headphones without speakers.
