32
To avoid damage to the
Epilog
to your system, please connect only digital source
devices to the DAC module! The module can not handle analog signals at the inputs,
and also the source device could suffer damage.
4.7.1 The necessary Software
To drive the DAC module
Epilog
needs firmware version V0.10 or higher. If the
installed firmware is "older" than V0.10 (
the number is less than 0.10
), so you need only
perform an update. (See section 4.1)
4.7.2 The connectors on the back
DAC
D ia l o g
A
OPT.
B
USB
1
3
2
4
5
[
1
]
and
[
2
]
A and B
The RCA jacks A (
1
) and B (
2
) are the two coaxial SPDIF inputs. Here, all devices
can be connected, which have a standards-compliant SPDIF output.
[
3
] OPT.
To the optical fiber input OPT. (
3
) can be connected to a source device with a Toslink
optical cable. The data format is also SPDIF.
[
4
] USB
To the USB port (4) a computer can be connected. If the computer is the first time
connected to the epilogue, it takes a moment for the computer to install the required
