Chronolog
it is also possible to operate the
Epilog
with a tablet computer or
a smart phone.
From time to time it may be necessary to update the control software contained in
this basic unit. On the rear panel is for this purpose a USB socket (
26
) to which you
or your dealer can connect a computer to load the latest firmware into the memory of
the integrated amplifier. This software is provided for free on our website. Software
updates will always be necessary, if a newly developed module is to be operated,
which did not even exist when buying the
Epilog
. In the Info menu of the
Epilog
the currently version can be read. On our website you can then check
whether your device already has the latest software, or whether an update is needed.
The massive cabinet of the
Epilog
consists of 2mm sheet steel and solid
aluminum of various thicknesses. The cover, for example, consists of a sandwich of
steel and aluminum and is in the important frequency range acoustically "dead".
Due to the complex cabinet construction sound may be best avoided by
microphonics.
2.1 Safety
TRIGON
ELEKTRONIK GMBH
assumes no liability for any damage caused by
improper handling, or failure to follow safety instructions.
Amplifiers must not be installed in close proximity to heat sources such as radiators,
stoves, high power light sources, open flames, etc... and should not be exposed to
severe shocks or vibrations.
Do not connect any electronic device to AC mains immediately after transport from
the cold into a warm environment. Condensation may occur and cause damage to
the device. Please wait until the unit has reached room temperature.
The amplifier should not be exposed to direct sunlight.
Make sure to install the unit with enough space for proper ventilation.
Never operate the equipment without the protective housing cover. Before opening
the unit remove the AC plug from the socket.
Never attempt to bypass the fuse. Please replace a blown fuse only with a fuse of the
same type and value.
No user serviceable parts inside. All maintenance or repair must be performed by
authorized and specially trained personnel only. Tampering and damage caused by
improper use or unauthorized intervention will void warranty.
