1. Speaker ON / OFF
[
■] Speakers
ON
2. Set initial volume level
[
] Vol. Base Level
3. Adjust stereo balance
[
] Balance
4. 10V Trigger On/Off
[
] 10V Remote
5. Adjust display brightness
[
] Brightness
6. Select language
[
] Language
ENGLISH
7. Dsiplay status information
[
] Infos
8. Reset to Factory Default
[
] Reset Settings
The
[SET]
menu contains three pages.
Various sub-menus can be accessed with key (
10)
(down) and key (
6)
(up).
[■] Vol. Base Level
This function allows setting the initial volume level assumed by the EPILOG upon
turn-on.
This value can be set with the volume knob (
3)
or with keys (
7)
und (
8).
Leaving this
sub-menu stores the setting.
[■]
Balance
Set the L/R channel balance. This value can be adjusted using the volume knob (
3)
with the keys (
7)
and (
8)
.
[■]
10V Remote ON/OFF
Enable or disable the10V trigger output with keys (
7)
and (
7)
for remote switching of
associated equipment (e.g. power amplifiers, powered speakers, etc...) equipped
with this feature. The control voltage is output at the jack (
27
) on the rear panel.
[■]
Brightness
The intensity of the front panel display can be adjusted from this sub-menu. Note that
the text displays (
5)
as only four intensity levels, whereas the volume display can be
adjusted from 10% to 100%.
Use this sub-menu to adjust the display brightness. Adjust with volume knob (
3)
, or
with keys (
7)
and (
8)
. The adjustment is stored when exiting this sub-menu.
[■]
Language
Select the display language with keys (
7)
and (
8)
.
(Currently two choices are available: German (Key
7
) and English (Key
8
))
[■]
Infos
For this sub-menu press key (
8)
to display the currently installed software version.
