The currently installed Software version is displayed in the first line, after the
TRIGON
logo.
The second line [
INS
] displays the information about installed input modules and
number of available inputs.
The third line [
OUTS
} displays the information about installed output modules and
number of available outputs.
Pressing the key (
8)
again does plays information about the modules installed in the
individual slots.
In this example: Slot 1 contains a balanced input module with hardware revision 0 and software
revision 0. This module has one input.
Use keys (
7)
and (
8)
to get detailed information on every slot.
Press key (
6)
to exit the info sub-menu and go to the next sub-menu.
[■] Reset settings
In the event that you want to reset the
Epilog
to factory default settings, depress
button (
9)
in this menu for at least 5 seconds. The
Epilog
will display a count-
down sequence and then re-boot. The
Epilog
then reverts to normal playback
mode.
