26
Pin-1 = Ground
Pin-2 =
Pin-3 = Signal
–
Up to five
BAL-INPUT
modules can be used in one
Epilog
.
4.3 UNBAL-OUTPUT module
4.4 BAL-OUTPUT module
A maximum of four BAL OUTPUT modules can be used in one
Epilog
amplifier.
The volume of all output modules is controlled by the master volume control
designated in the SET menu. However, it is possible to trim the relative output level
for each module. The individual outputs are electronically separated from each other.
UNBAL-OUTPUT
R
L
MAIN
REC
D ial o g
This module contains one single-ended MAIN preamplifier
output with adjustable volume and a RECORD output to
connect a recording device. The MAIN output is typically
connected to a power amplifier or a loudspeaker amplifier
with active electronics. The output impedance is 47 ohms,
i.e. low enough that even long interconnect cables (up to
8 meters) can be used.
BAL-OUTPUT
R
L
D ial o g
1
1
3
3
2
2
The module BAL- OUTPUT contains a balanced
amplifier whose output is also capable of driving
longer cables without significant quality loss. This
output is connected to the balanced input of a power
amplifier or active speaker. Balanced connections
have the advantage that noise and interference with
the signal are effectively suppressed.
