Revision: 0
FlexxPump1 B
User Manual
35
EN-
6.3.8 PRO-Menu operating mode Hour-Mode -h-
The PRO-Menu allows you to change the settings of the FP1 B's dispensing behavior.
If you are in operating mode Hour-Mode -h-, you can change the
dispensing time h
as
well as the
number of cycles c
(number of strokes). In principle, during the dispensing
time h, the FP1 B executes exactly the number of strokes c (each 0.16 cm³) specified in
the number of cycles c. The cycles c are evenly distributed over the dispensing time h.
There is no fault or error at FP1 B.
In the PRO menu, the first step is to set the dispensing time h and afterwards the num
-
ber of cycles c; direct access to the number of cycles c is not possible.
Remove the activation and programming key from the bottom of FP1 B and place
it on the action area. Hold the activation and programming key on the action surface.
Leave the activation and programming key on the action area until PRO is displayed in
the LCD.
Remove the activation and programming key from the action area as long as PRO is
displayed in the LCD.
Ü
The LCD flashes together with the green LED twice. The LCD first displays the
currently set value of the dispensing time h (h
is
). Now you have the possibility to change
the values of the dispensing time h.
