Revision: 0
FlexxPump1 B
User Manual
13
EN-
4.
Transport and storage
4.1
Packaging
The FP1 B is delivered in an outer packaging (cardboard box) and - depending on the
scope of delivery with a lubricant cartridge and other accessories - in the same packa-
ge. To protect them from moisture and dirt, they are also packed in PE films. As a pre
-
ventive protective measure against the escape of the prefilled lubricant from the FP1 B,
appropriate protective caps are fitted on the lubricant supply and at the lubricant outlet.
Dispose the packaging materials at the designated disposal points in compliance with
the relevant national and company regulations.
After receiving the FP1 B, check the delivery note for completeness and correctness.
Any missing parts or damage must be reported immediately to the forwarding agent,
the insurance company or TriboServ GmbH & Co. KG in writing.
4.2
Transport
NOTICE
Hard shocks, e.g. due to falling or setting down too hard, can
damage the FP1 B.
§
Do not throw the FP1 B.
§
When using lifting equipment, only use hoists and load
handling attachments in perfect condition and with sufficient
load capacity.
§
The permissible lifting weight of the lifting device must not be
exceeded.
Store the FP1 B in its original packaging in a vertical position in a dry, frost-free en-
vironment at an ambient temperature of +5°C to +30°C. The maximum storage time in
unopened condition is 2 years.
The so-called "First-In-First-Out-Principle" (FiFo) is recommended for storage logistics.
4.3
Storage
