Revision: 0
FlexxPump1 B
User Manual
29
EN-
6.3.3 Switching on and off
FP1 B is switched off (OFF).
Hold the activation and programming key on the action surface. The yellow LED lights
up. Leave the activation and programming key on the action area until ON is displayed
in the LCD. Remove the activation and programming key from the action area as long
as ON is displayed in the LCD. The yellow LED disappears; the LCD flashes together
with the green LED twice.
Ü
If no error is detected during the FP1 B self-check, ON is displayed in the LCD.
The green LED lights up once every 30 seconds, FP1 B is ready for operation and will
dispense lubricant according to the set values.
Insert the activation and programming key into the hole provided on the underside of
the FP1 B.
FP1 B is ON, the green LED flashes every 30 seconds.
Hold the activation and programming key on the action surface. The yellow LED lights
up. Leave the activation and programming key on the action area until OFF is displayed
in the LCD. Remove the activation and programming key from the action area as long
as OFF is displayed in the LCD. The yellow LED disappears; the LCD flashes together
with the green LED twice.
Ü
FP1 B is OFF; OFF appears in the LCD. FP1 B stops dispensing lubricant.
Insert the activation and programming key into the hole provided on the underside of
the FP1 B.
FP1 B can be switched off in any state (normal operating state or error) in the man-
ner described here.
Switch the FP1 B on:
Switch the FP1 B off:
30s
30s
