Tri-Star TAC-7AE, Руководство по эксплуатации и техническому обслуживанию

Страница: 49 / 52

TAC-7X
MANUAL
10. Pneumatics
6-11
Troubleshooting
Chart
The pneumatic system is described in Section 5 of this manual and
detailed in Figure 6-7. If a pneumatic or electric malfunction occurs, refer to
Section 5 to determine the probable cause.
Figures 6-1and 6-2 depict the locations of various components. Refer to
these figures if replacement of a component is deemed necessary.
Use standard troubleshooting techniques and normal standards of
workmanship when locating and replacing defective components.
The following is a list of malfunctions that may occur during operation.
Following the malfunction specified are probable causes of that mal-
function. Refer to applicable handbook sections for correction.
MALFUNCTION CAUSE
1. No contacts in
track assembly
2. No contact in
transfer tip.
a. Feeder-bowl off
b. Feeder-bowl amplitude
too high.
c. Feeder-bowl amplitude
too low.
d. Air pressure incorrect.
e. Incorrect contacts.
f. Incorrect track
assembly.
g. TAC not level.
h. Insufficient quantity of
contacts in bowl.
i. Dirt in track.
a. No contacts in the track.
b. Drop tube.jammed.
c. Incorrect contacts
d. Incorrect drop tube.
e. Incorrect transfer tip.