62
Optional Equipment
(
for qualified installers only)
© Travis Industries
9/17/2020 - 1536
DVL EG GSR2
5. Place ember chunks on any portion of the front or rear burner as long as it does not obstruct any
burner holes.
6. Detail the burner with Rock Wool. The included rock wool is placed on top of the burner to enhance
the glow from the burner.
The rockwool can be applied in a relatively thick layer.
The best method
for applying the rock wool is to brush it on to the burner. Compress a clump of rockwool between your
thumb and forefinger. Use a stiff brush to apply rockwool fibers onto the burner. Do not use the entire
bag of rockwool. Use only a small amount and save the remainder. Over-use of rockwool will diminish
the glow and may cause sooting or other adverse conditions.
NOTE:
Remove all rockwool from the pilot area (see below).
