Optional Equipment
(
for qualified installers only)
55
© Travis Industries
9/17/2020 - 1536
DVL EG GSR2
8. Make sure the rear
fireback is centered
in the insert.
(DVL ONLY)
Replace the rear
fireback clip to
secure the rear
fireback in place.
(DVS ONLY)
The
rear fireback will be
held in place by the
side firebacks in the
next step. Support
the rear fireback
with your hand until
at least one side
fireback is in place
(next step).
9. Install one of the side
panels into the firebox
as shown below. The
side fireback rests on
a shelf located to the
side of the burner.
NOTE
: Push the side
fireback backward
until it contacts the
rear fireback.
Hold the side firebacks at an angle
and place them into position.
Replace the fireback
clip to secure the
fireback in place.
(see step #8).
NOTE: Mitered
corners should face
the front of the insert.
