54
Optional Equipment
(
for qualified installers only)
© Travis Industries
9/17/2020 - 1536
DVL EG GSR2
BLACK GLASS FIREBACKS ONLY – For all other firebacks skip to step 8
NOTE:
No tools are needed for
this step.
5. Prepare the side fireback clips.
Gently bend the clips back and
forth along the lengthwise
perferation until the clips
separate.
6. Separate
the
top glass clips
from the bottom glass clips by
gently bending the back and
forth at the perferations (about
1/3 from the end).
7. Prepare the side firebacks for
installation. Each side uses
(1) large clip on the bottom of
the panel and (1) small clip on
the top of the panel (just after
the mitered corner. Place the
clips as shown below and
bend the small tabs (1 on the
top and 3 on the bottom) to
secure the clips to the glass.
NOTE:
You may want to pre-
bend the tabs before placing
the clip on the glass.
Front Side View
Rear Side View
