manualshive.com logo in svg

Travis Industries 2003 ROF, Руководство пользователя

Поделиться
Скачать
Travis Industries 2003 ROF Скачать руководство пользователя страница 30

30

 Warranty 

© Travis Industries 

4030407

 100-01146 

To register your TRAVIS INDUSTRIES, INC. 

5

 Year Warranty, complete the enclosed warranty card and mail it within 

ten (10)

 days of the 

appliance purchase date to: TRAVIS INDUSTRIES, INC., 10850 117th Place N.E., Kirkland, Washington 98033.  TRAVIS INDUSTRIES, INC. 
warrants this gas appliance (appliance is defined as the equipment manufactured by Travis Industries, Inc.) to be defect-free in material and 
workmanship to the original purchaser from the date of purchase as follows: 

Year 1 - COVERAGE: PARTS & LABOR 

Burner Assembly: 

Burner, Burner Shield, Orifice 

Water Tank Assembly: 

Upper and Lower tank. Mounting Brackets, Perforated 
Aluminum Grates  

Electrical Assembly 

:

 

Lights, Electronic control module, wiring harness, snap 
discs, water level sensor 
 

Gas Control Assembly 

Adjustable control valve, electronic ignition module, millivolt 
wiring and connectors (located on the appliance structure), 
pilot hood, orifices, pilot gas line, spark igniter, flame sensor

 

Water Circulating Assembly 

Pumps, Spray Head, Spray Ring, Water Fittings and Water 
Hoses within the appliance  
 

Accessories 

Glass beads 

Re-Installation Allowance 

In cases where appliance must be removed from home for 
repairs, a partial cost of re-installation is covered (pre-
authorization required) 

One-Way Freight Allowance 

One-way freight allowance on pre-authorized repair done 
at factory is covered. 

Exclusions

: 

Paint, Gasketing

 

Year 2 - COVERAGE: PARTS & LABOR 

Burner Assembly: 

Burner, Burner Shield, Orifice 

Water Tank Assembly: 

Upper and Lower tank. Mounting Brackets, Perforated 
Aluminum Grates  
 

Accessories 

Glass beads 

Re-Installation Allowance 

In cases where appliance must be removed from home for repairs, 
a partial cost of re-installation is covered (pre-authorization 
required)

 

One-Way Freight Allowance 

One-way freight allowance on pre-authorized repair 
done at factory is covered. 

Exclusions

: 

Paint, Gasketing, Electrical Assembly, Gas Control Assembly, Water Circulating Assembly

 

Years 3 THROUGH 5 - COVERAGE: PARTS & LABOR 

Water Tank Assembly: 

Upper and Lower tank. Mounting Brackets, Perforated 
Aluminum Grates  
 

One-Way Freight Allowance 

One-way freight allowance on pre-authorized repair 
done at factory is covered.

 

Exclusions

: 

Paint, Gasketing, Burner Assembly, Accessories, Re-Installation Allowance, Electrical Assembly, Gas Control Assembly, Water 
Circulating Assembly

 

CONDITIONS & EXCLUSIONS 

1. 

This new gas appliance must be installed by a qualified gas appliance technician.  It must be installed, operated, and maintained at all times in accordance with the instructions in the 
Owner’s Manual.  Any alteration, willful abuse, accident, neglect, or misuse of the product shall nullify this warranty. 

2. 

This warranty is nontransferable, and is made to the ORIGINAL purchaser, provided that the purchase was made through an authorized TRAVIS dealer. 

3. 

Discoloration and some minor expansion, contraction, or movement of certain parts and resulting noise, is normal and not a defect and, therefore, not covered under warranty.  The 
installer must ensure the appliance is burning as per the rating tag at the time of installation.  Over-firing (operation above the listed BTU rate) of this appliance can cause serious 
damage and will nullify this warranty.  

4. 

The warranty, as outlined within this document, does not apply to Non-Travis accessories used in conjunction with the installation of this product. If in doubt as to the extent of this 
warranty, contact your authorized TRAVIS retailer before installation.   

5. 

Travis Industries will not be responsible for inadequate performance caused by environmental conditions such as nearby trees, buildings, roof tops, wind, hills or mountains or negative 
pressure or other influences from mechanical systems such as furnaces, fans, clothes dryers, etc. 

6. 

This Warranty is void if: 
a. 

The unit has been operated in atmospheres contaminated by chlorine, fluorine or other damaging chemicals. 

b. 

The unit is subject to submersion in water or prolonged periods of dampness or condensation. 

c. 

Any damage to the unit or other components due to water, or weather damage that is the result of, but not limited to, improper installation. 

7. 

Exclusions to this 7 Year Warranty include:  injury, loss of use, damage, failure to function due to accident, negligence, misuse, improper installation, alteration or adjustment of the 
manufacturer's settings of components, lack of proper and regular maintenance, damage incurred while the appliance is in transit, alteration, or act of God. 

8. 

This 7 Year warranty excludes damage caused by normal wear and tear, such as paint discoloration or chipping, worn or broken pumps, worn or broken beads, burn out light bulbs, etc.  
Also excluded is damage to the unit caused by abuse, improper installation, modification of the unit, drilling of the orifices, or the use of fuel other than that for which the unit is 
configured.  Units are shipped for natural gas and must be converted to propane using the included conversion kit.  Confirm fuel configuration with your installer.   

9. 

TRAVIS INDUSTRIES, INC. is free of liability for any damages caused by the appliance, as well as inconvenience expenses and materials.  Incidental or consequential damages are not 
covered by this warranty.  In some states, the exclusion of incidental or consequential damage may not apply. 

10. 

This warranty does not cover any loss or damage incurred by the use or removal of any component or apparatus to or from the gas appliance without the express written permission of 
TRAVIS INDUSTRIES, INC.  and bearing a TRAVIS INDUSTRIES, INC. label of approval. 

11. 

Any statement or representation of TRAVIS products and their performance contained in TRAVIS advertising, packaging literature, or printed material is not part of this 7 year warranty. 

12. 

This warranty is automatically voided if the appliance’s serial number has been removed or altered in any way. If the appliance is used for commercial purposes, it is excluded from this 
warranty. 

13. 

No dealer, distributor, or similar person has the authority to represent or warrant TRAVIS products beyond the terms contained within this warranty.  TRAVIS INDUSTRIES, INC. 
assumes no liability for such warranties or representations. 

14. 

Travis Industries will not cover the cost of the removal or re-installation of enclosures, decks, paving other components. 

15. 

If for any reason any section of this warranty is declared invalid, the balance of the warranty remains in effect and all other clauses shall remain in effect. 

16. 

THIS 7-YEAR WARRANTY IS THE ONLY WARRANTY SUPPLIED BY TRAVIS INDUSTRIES, INC., THE MANUFACTURER OF THE APPLIANCE.  ALL OTHER WARRANTIES, 
WHETHER EXPRESS OR IMPLIED, ARE HEREBY EXPRESSLY DISCLAIMED AND PURCHASER’S RECOURSE IS EXPRESSLY LIMITED TO THE WARRANTIES SET FORTH 
HEREIN. 

IF WARRANTY SERVICE IS NEEDED: 

1. 

If you discover a problem that you believe is covered by this warranty, you MUST REPORT it to your TRAVIS dealer WITHIN 30 DAYS, giving them proof of purchase, the purchase date, 
and the model name and serial number. 

2. 

Travis Industries has the option of either repairing or replacing the defective component.  

3. 

If your dealer is unable to repair your appliance’s defect, he may process a warranty claim through TRAVIS INDUSTRIES, INC., including the name of the dealership where you 
purchased the appliance, a copy of your receipt showing the date of the appliance’s purchase, and the serial number on your appliance.  At that time, you may be asked to ship your 
appliance, freight charges prepaid, to TRAVIS INDUSTRIES, INC.  TRAVIS INDUSTRIES, INC., at its option, will repair or replace, free of charge, your TRAVIS appliance if it is found to 
be defective in material or workmanship within the time frame stated within this 7-year warranty.  TRAVIS INDUSTRIES, INC. will return your appliance, freight charges (years 1 to 5) 
prepaid by TRAVIS INDUSTRIES, INC., to your regional distributor, or dealership. 

4. 

Check with your dealer in advance for any costs to you, when arranging a warranty call.  Dealers may require you to pay a service or trip charges for any warranty work.  This charge can 
vary from store to store.  

 

Содержание 2003 ROF

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды