Operation
4.4 MANUAL START/STOP OPERATION
1. MANUAL START: Manual mode is selected by pressing the button; a LED besides the
button will illuminate to confirm the operation.
Then press button to start the genset; can detect crank disconnect condition and
generator accelerates to high-speed running automatically.
With high temperature, low oil pressure, over speed and abnormal voltage during generator
running, controller can protect genset to stop quickly. (please refer to No.3~8 of Automatic
Start Sequence for detail procedures.) The controller will send Close Gen signal after the
genset is normal running.
2. MANUAL STOP: Press can stop the running generators. (please refer to No.2~6 of
Automatic Stop Sequence for detail procedures).
8
032-5094-1A-EN
