RTHD-SVX01K-EN
53
Controls
Overview
Optimus™ Model RTHD units utilize the following control/
interface components:
•
Symbio™ 800 Controller
•
Tracer AdaptiView™ TD7 Operator Interface
Symbio 800
The Symbio™ 800 controller is a factory-installed,
application specific and programmable controller
designed to control chillers and large packaged HVAC
equipment. A 7 inch user interface features a touch
sensitive color screen that provides facility managers at-a-
glance operating status, performance monitoring,
scheduling changes, and operating adjustments. Other
advanced features include automated controller backup,
and optional features such as secure remote connectivity,
wireless building communications, mobile device
connectivity, and custom programming with expandable I/
O.
For more information, see
Symbio™ 800 Controller
Installation, Operation, and Maintenance manual,
BAS-SVX080*-EN.
AdaptiView Display
Information is tailored to operators, service technicians,
and owners. When operating a chiller, specific information
is needed on a day-to-day basis setpoints, limits,
diagnostic information, and reports.
This information is provided through the AdaptiView™
display. Logically organized groups of information chiller
modes of operation, active diagnostics, settings and
reports put information conveniently at your fingertips.
For more information, see
Optimus™ Water-Cooled
Chiller Model RTHD AdaptiView Display User Guide
,
RLC-SVU008*-EN.
Tracer
®
TU
Tracer
®
TU (non-Trane personnel, contact your local Trane
office for software) adds a level of sophistication that
improves service technician effectiveness and minimizes
chiller downtime.TheTracer AdaptiView™ control’s
operator interface is intended to serve only typical daily
tasks. The portable PC-based service-tool software,
Tracer
®
TU, supports service and maintenance tasks.
Tracer
®
TU serves as a common interface to all Trane®
chillers, and will customize itself based on the properties of
the chiller with which it is communicating.Thus, the
service technician learns only one service interface.
The panel bus is easy to troubleshoot using LED sensor
verification. Only the defective device is replaced.Tracer
®
TU can communicate with individual devices or groups of
devices.
All chiller status, machine configuration settings,
customizable limits, and up to 100 active or historic
diagnostics are displayed through the service-tool
software interface.
LEDs and their respective Tracer
®
TU indicators visually
confirm the availability of each connected sensor, relay,
and actuator.
Tracer
®
TU is designed to run on a customer’s laptop,
connected to the Tracer AdaptiView™ control panel with a
USB cable. Your laptop must meet the following hardware
and software requirements:
•
1 GB RAM (minimum)
•
1024 x 768 screen resolution
•
Ethernet 10/100 LAN card
•
Available USB 2.0 port
•
Microsoft
®
Windows
®
7 Enterprise or Professional
operating system (32-bit or 64-bit) or Windows 8.1.
Important:
Tracer
®
TU V8.6 was the final release to
support Windows XP. Beginning with
Tracer
®
TU V9.0, you will need to migrate to
Windows 7 or Windows 8.1 operating
system.
Note:
Tracer
®
TU is designed and validated for this
minimum laptop configuration. Any variation from
this configuration may have different results.
Therefore, support for Tracer
®
TU is limited to only
those laptops with the configuration previously
specified.
For more information, see TTU-SVN01*-EN Tracer
®
TU
Getting Started Guide.
Содержание Optimus RTHD
