manualshive.com logo in svg

Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

7.22.2 Removal From Storage

Perform the following tasks to remove the Terex Rubber Track
Loader from storage and return to operating condition.

Return to Operating Condition:

• Remove protective lubricant from cylinder rods.
• Lubricate all chassis, loader and undercarriage points.
• Safely remove jack stands and lower machine to the ground.
• Install fully charged battery.
• Remove exhaust outlet cover.
• Perform pre-start checklist in chapter 5 of this manual.
• Perform starting procedure (chapter 5)
• Let engine run while observing engine monitoring systems

(gauges/lights). Look for anything out of the ordinary. Should the
optional engine temp. gauge read excessive temperatures (

or

warning light illuminate) or should the oil pressure or hydraulic oil
temp. lights illuminate, shut the machine down immediately.
Diagnose and make needed repairs before resuming operation. 

7 MAINTENANCE

80

Содержание Terex PT30CE






















































































Отзывы:

Нет отзывов

Похожие инструкции для Terex PT30CE

Бренды по названию

Популярные бренды

Загрузить еще бренды