Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию

Страница: 28 / 85

• When performing service that requires the lift arms to be in the
raised position, always utilize the lift arm brace.
• If safety equipment needs to be dismantled to fit equipment or
perform maintenance or repairs, it must be reattached and test
ed immediately after the maintenance and repair jobs are com-
pleted.
• Clean the machine prior to beginning work. Clean especially
the connections and screw couplings of oil, fuel and upkeep
materials at the beginning of the maintenance/repair job.
• Do not use flammable liquids to clean the machine.
• Perform tasks on the machine that involve welding or grinding
only if approved by Terex. Clean the machine and the work
area of dust and any combustible materials before welding or
grinding to avoid fire or explosion.
• Before cleaning the machine with water or steam jets (high-
pressure cleaner) or other cleaning agents, cover or seal over
all openings in which water, steam or cleaning agents should
not penetrate for safety and/or functional reasons. Electrical
motors, switch panels and plug connections are especially
subject to damage. Before cleaning, inspect all fuel, engine oil
and hydraulic oil lines for leaks, loose connections, rubbed
spots and damage. Repair or replace any damaged compo-
nents immediately.
• When working with oils, greases and other chemical sub
stances, observe all safety requirements that apply to the prod
uct in question.
• Ensure that fuels, lubricants and coolants as well as replaced
parts are disposed of in an environmentally proper manner.
• Proceed carefully when working with hot lubricants, coolants
and fuels (danger of burns and scalding).
2 SAFETY
27