manualshive.com logo in svg

Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

7.22 Storage

It may be necessary to store your Terex Rubber Track Loader for an
extended period of time. 

Perform the following tasks to prepare the machine for storage.

7.22.1 Storage Preparation

• Thoroughly clean the machine (inside and out) including the

engine compartment and underbody. Open hood, remove belly
pans and pressure wash to remove all buildup and debris.

• Allow machine to dry thoroughly, then reinstall belly pans, close

hood. Touch up any paint blemishes to prevent rust.

• Lubricate all chassis, loader and undercarriage points as indicated

on the chart in this chapter. Wipe away any excess grease.

• Replace any worn or damaged components.
• Add fuel stabilizer to near empty fuel tank, then fill to evenly dis-

tribute stabilizer throughout fuel.

Note:

Run the engine for 5 minutes to circulate stabilized fuel

throughout fuel system.

• Park the machine in a dry place that provides protection from the

elements. 

• Drain and refill the cooling system with 50/50 pre-mixed

antifreeze/water.

• Replace engine oil and filter. (ch. 7)
• Replace hydraulic oil and filters (ch. 7)
• Jack the machine and rest the chassis on approved jack stands to

remove weight from the torsion axles and suspend the tracks off of
the ground.

• Apply protective lubricant (grease) to all exposed cylinder rods.
• Replace air cleaner elements and a/c filter element (if equipped).
• Return all controls to neutral position.
• Cover the exhaust outlet to shield it from the elements and foreign

objects.

• Disconnect and remove the battery from the machine. Adjust the

electrolyte level if needed and charge before storing. Store in a
warm dry place. 

Do not allow battery to freeze. 

Charge periodi-

cally during storage as necessary.

• Label or tag the machine to indicate storage condition. 

7 MAINTENANCE

79

Battery contents are flammable and corrosive. Contact with
skin can cause burns! Do not smoke or allow open flame near

the battery to avoid explosion! Wear appropriate PPE.

Содержание Terex PT30CE






















































































Отзывы:

Нет отзывов

Похожие инструкции для Terex PT30CE

Бренды по названию

Популярные бренды

Загрузить еще бренды