manualshive.com logo in svg

Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

41

4.3 Throttle

The throttle (hand lever) is located to the right of the operator’s right
leg when seated in the machine. The throttle controls engine rpm. 

•

Move the lever forward to increase engine RPM. 

•

Move the lever rearward to decrease engine RPM.

•

Select a lower rpm for work that requires delicate operation of 
the machine. 

•

Select a higher rpm for faster travel speed or when more 
power or flow is required for a task.

4.4 Operator Seat

Seat Adjustment

The seat in the PT-30 is a suspension style seat adjustable for both
operator weight (spring pre-load) and operator height variation in
fore and aft directions. 

To adjust for weight:

Pivot the weight adjustment lever away from the seat. Twist clock-
wise for heavier operator or counter-clockwise for lighter operator.

To adjust for height:

Lift upward on the height adjustment lever, slide the seat forward or
rearward as needed, then release the lever to set

.

4 MACHINE DESCRIPTION / CONTROLS

weight

height

Содержание Terex PT30CE






















































































Отзывы:

Нет отзывов

Похожие инструкции для Terex PT30CE

Бренды по названию

Популярные бренды

Загрузить еще бренды