manualshive.com logo in svg

Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

7.1 General

The operating condition and life expectancy of a machine is largely
influenced by care and maintenance. For this reason, it is in every
machine owner’s interest to perform the specified maintenance work
and comply with the service intervals. 

This chapter describes periodic maintenance, inspection and lubri-
cating tasks. The maintenance interval charts list all work to be per-
formed on the machine at regular intervals. 

The supplemental engine operation and maintenance manual pro-
vided with every machine contains information specific to the proper
operation, inspection and maintenance of the engine and its internal
components. This manual must be read, understood and followed in
order to properly maintain the engine and comply with warranty
requirements.

The operator must have sufficient knowledge to inspect and main-
tain the machine. The operator should follow the procedures in this
manual and take any necessary precautions to ensure his/her safe-
ty. Wear appropriate personal protection equipment for all tasks.

7.2 Care and cleaning

Cleaning the machine
•

Do not use aggressive detergents to clean the machine. We 
recommend using commercially available cleaning agents for 
passenger cars.

•

Linings (insulating materials, etc.) should not be exposed 
directly to water, steam or high-pressure jets.

•

When cleaning with water or steam jets, take care not to direct 
the jet into exhaust and air filter openings.

•

When cleaning the engine with water or steam jet, do not 
expose sensitive engine parts, such as generator, wiring, oil 
pressure switches, etc. directly to the jet.

•

Pay particular attention to the radiator / oil cooler, engine com-
partment, and chassis area when cleaning. Remove any visible
debris from these areas prior to cleaning.

•

After wet cleaning lubricate the machine as specified in section 
7.4 prior to operation. 

•

Inspect the machine after cleaning for the presence and condi-
tion of safety signs. If any are missing or damaged, contact 
your dealer immediately to obtain a replacement.

7 MAINTENANCE

63

Содержание Terex PT30CE






















































































Отзывы:

Нет отзывов

Похожие инструкции для Terex PT30CE

Бренды по названию

Популярные бренды

Загрузить еще бренды