manualshive.com logo in svg

Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

7.17 Air Cleaner Cleaning procedure

1. 

Remove loose dirt from the element with compressed air or 
water hose.

•

Compressed air: 690 kPa max. .32cm diameter nozzle at 
least 5cm away from the filter element.

•

Water: 276 kPa max. without nozzle.

2.

Soak the filter element in a non sudsing detergent solution for 
at least 15 minutes moving it gently through the solution to fur
ther clean the element. (Never soak for more than 24 hours.)

3.

Rinse the filter thoroughly with a gentle stream of water to 
remove all dirt and remaining detergent.

4.

Allow the filter to dry completely

before reinstalling it into the

machine.

7 MAINTENANCE

75

Do not use any heat source other than warm air at less than 71°
C to dry the filter.

NOTICE

During the engine warranty period, do not clean the filter ele-
ments. Instead, replace the filter elements when soiled or dam-
aged to comply with engine warranty requirements.

NOTICE

Содержание Terex PT30CE






















































































Отзывы:

Нет отзывов

Похожие инструкции для Terex PT30CE

Бренды по названию

Популярные бренды

Загрузить еще бренды