7.10 Water Separator
The water separator (fig. 7.10-1),
located on the left side of the hyd.
reservoir) removes water from the
fuel supply as the engine runs.
Drain the water separator daily to
maintain proper function.
To drain the water separator:
1.
With the engine off and cool, and key removed from the igni
tion, open the hood at the rear of the machine to access the
water separator.
2.
Loosen the twist valve on the bottom of the separator.
3.
Retighten the valve once all of the water has been drained from
the catch bowl and close the hood to complete the procedure.
7.11 Fuel Filter Change
The fuel filter should be changed
every 500 service hours, or as
needed. A plugged fuel filter can
cause loss of engine power, rough
running, or no start.
To change the filter:
1.
With the engine off and cool,
and key removed from the
ignition, open the hood at the rear of the machine to access
the fuel filter.
2.
Clean the outside of the filter (1) thoroughly (fig. 7.11-1).
3.
Remove bolt (2) on the top of the filter assembly, then remove
filter. (fig. 7.11-1)
4.
Reverse step 3 to install the new fuel filter into the machine.
7 MAINTENANCE
70
2
1
7.10-1
7.11-1
Содержание Terex PT30CE
