Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию

Страница: 48 / 85

5.1 General Information
Operating a Terex Rubber Track Loader is intended to be as safe
and simple as possible. This section expands on the machine con-
trols portion of the manual and also covers safe operation proce-
dures to follow while operating.
5.2 Pre-Operation Safety Checklist
Before operating the machine, perform a pre-operation safety check.
Inspect the machine for any items that may affect safe operation.
Check to make sure:
1. Engine compartment, chassis and coolers are clean and free of
debris.
2. Windows and lights are clean and unobstructed.
3. Tracks are in good condition and are properly tensioned.
4. Fluids are filled to proper levels.
5. Accessory belts are in good condition and properly tensioned.
6. Hydraulic hoses and fittings are in good condition. (no visible
signs of wear)
7. Battery cables are in good condition and properly fastened.
8. Joysticks, auxiliary hydraulic switch are in neutral position.
9. The R.O.P.S./F.O.P.S. approved operator enclosure is not dam-
aged or distorted structurally in any way.
10. The seat belt and lap bar restraint (if equipped) are in good
working order.
11. All safety signs are in place and legible on the machine.
12. All control devices are present, appear to be in good condition,
and are not damaged in any way.
13. The rear/side view mirrors are adjusted for proper viewing.
14. You have read and understood the information in this manual in
its entirety.
5 OPERATION
47
Never use bare hands to check for leaks! Pressurized oil can
penetrate skin and cause gangrene. Seek medical attention
immediately from a physician familiar with this type of injury!