Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию

Страница: 50 / 85

5.4 Surface Preservation
Terex rubber track loaders
are designed to produce
minimal ground disturbance
while operating on finished
surfaces like turf, however,
care should be taken while
operating on these surfaces
to prevent blemishes from
occurring.
Turning poses the greatest risk of surface disturbance during opera-
tion. Moving in a straight line across turf will cause little or no distur-
bance, whereas tight cornering will most likely cause blemishes.
While working on turf, make gradual turns. (see item A) If space is
limited, turn gradually by moving back and forth until facing the
desired direction. (see item B)
5.5 Filling The Bucket
Steps: (see illustration)
1.
Lower the lift arms until they rest on the frame.
2. Tilt the bucket slowly forward until the cutting edge engages
the ground.
3. Drive the machine forward until the bucket is full of material.
4. Curl the bucket and raise the lift arms simultaneously to
break the load free from the pile.
5. Maneuver the machine clear of the pile and then lower the lift
arms, keeping the bucket curled upward, to approximately 25-
30 cm above the ground for transporting.
5 OPERATION
49
A B
5.4-1