Track Loader Parts Terex PT30CE, Руководство по эксплуатации и обслуживанию

Страница: 54 / 85

5.11 Operation on Inclines
By design, Rubber Track Loaders are very stable on inclines.
Machine weight is distributed evenly throughout the chassis and the
suspended undercarriage track system provides excellent traction
and floatation on nearly all surfaces.
5.12 Shut Down Procedure
1. Stop, lower and disconnect any work attachments that may be
coupled to the quick attach.
2. Park the machine in a safe location (on firm and level ground)
where it is protected from the elements and vandals.
3. Lower the lift arms until they rest on the frame stops.
4. Reduce engine RPM to a low idle.
5. Turn the ignition key to the off position to stop the engine.
6. Remove the safety belt and raise the lap bar (if equipped).
7. Open the door (if equipped) and exit the machine using 3
points of contact as described in the starting procedure in this
section.
5 OPERATION
53
Even with these capabilities, caution should always be exer-
cised while operating the machine on an incline. Never oper-
ate the PT-30 on an incline in excess of 10° (17% grade). Do not
make sudden changes in direction, move slowly, and always carry
loads low to maximize machine stability.
When turning on an incline, back down the hill while slowly turning
until the machine is pointed in the desired direction. Then proceed
forward.