![background image](http://html1.mh-extra.com/html/tp-link/t2500g-10mps/html/tp-link/t2500g-10mps/t2500g-10mps_user-manual_1145700087.webp)
Managing System
Access Security Configurations
Configuration Guide
63
Step 1
configure
Enter global configuration mode.
Step 2
Use the following command to control the users’ access by limiting the IP address:
user access-control ip-based {
ip-addr ip-mask
} [
snmp
] [
telnet
] [
ssh
] [
http
] [
https
] [
ping
] [
all
]
Only the users within the IP-range you set here are allowed to access the switch.
ip-addr
: Specify the IP address of the user.
ip-mask
: Specify the subnet mask of the user.
[
snmp
] [
telnet
] [
ssh
] [
http
] [
https
] [
ping
] [
all
]
: Select to control the types for users’
accessing. By default, these types are all enabled.
Use the following command to control the users’ access by limiting the MAC address:
user access-control mac-based {
mac-addr
} [
snmp
] [
telnet
] [
ssh
] [
http
] [
https
] [
ping
] [
all
]
Only the users with the MAC address you set here are allowed to access the switch.
mac-addr
: Specify the MAC address of the user.
[
snmp
] [
telnet
] [
ssh
] [
http
] [
https
] [
ping
] [
all
]
: Select to control the types for users’
accessing. By default, these types are all enabled.
Use the following command to control the users’ access by limiting the ports connected to the
users:
user access-control port-based interface { fastEthernet
port-list
| gigabitEthernet
port-list
|
ten-gigabitEthernet
port-list
} [
snmp
] [
telnet
] [
ssh
] [
http
] [
https
] [
ping
] [
all
]
Only the users connecting to the ports you set here are allowed to access the switch.
port-list
: Specify the list of Ethernet port, in the format of 1/0/1-4. You can appoint 5 ports at
most.
[
snmp
] [
telnet
] [
ssh
] [
http
] [
https
] [
ping
] [
all
]
: Select to control the types for users’
accessing. By default, these types are all enabled.
Step 3
show user configuration
Verify the security configuration information of the user authentication information and the
access interface.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the type of access control as IP-based. Set the
IP address as 192.168.0.100,set the subnet mask as 255.255.255.0 and make the switch
support snmp, telnet, http and https.
Switch#configure
Содержание T2500G-10MPS
