manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 634

Configuration Guide     610

Configuring Network Security

PPPoE ID-Insertion Configuration

UDF Value

If UDF or UDF ONLY is selected, specify a string with at most 40 characters to encode 

the Circuit-id option.

Remote-ID

Enable or disable the Remote-ID Insertion feature. With this option enabled, the 

switch will insert a Remote ID to the received PPPoE Discovery packet on this port. 

Remote-ID Value

Specify a string with at most 40 characters to encode the Remote-id option.

7.2  Using the CLI

Follow these steps to configure PPPoE ID-Insertion:

Step 1

configure

Enter global configuration mode.

Step 2

pppoe id-insertion

Globally enable the PPPoE ID-Insertion feature.

Step 3

interface { fastEthernet 

port

 | range fastEthernet 

port-list

 | gigabitEthernet 

port

 | range 

gigabitEthernet 

port-list

 }

Enter interface configuration mode.

Step 4

pppoe circuit-id

Enable Circuit-ID Insertion feature, and the switch will insert a Circuit ID to the received 

PPPoE Discovery packet on this port. 

Step 5

pppoe circuit-id type { 

mac | ip | udf [

Value

] | udf-only [

Value

]

 }

Specify the type of the Circuit ID. The following options are provided:

mac

:

 

The source MAC address of the packet, the MAC address of the switch and the port 

number will be used to encode the Circuit-ID option.

ip

:

 

The circuit ID includes the following three parts: the source MAC address of the received 

packet, the IP address of the switch and the port number. This is the default value.

udf

 [

Value

]

: Specify a string with at most 40 characters. The circuit ID includes the following 

three parts: the source MAC address of the packet, the user-specified string and the port 

number.

udf-only

 [

Value

]

: Specify a string with at most of 40 characters. Only the specified string will 

be used to encode the Circuit-ID option.

Step 6

pppoe remote-id 

[

Value

]

Enable Remote-ID Insertion feature and specify the Remote ID.

Value

:

 

Specify a string with at most 40 characters. The source MAC address of the packet 

and the specified string will be used to encode the Remote-ID option.

Step 7

show pppoe id-insertion global

Verify the global configuration of PPPoE ID-Insertion.

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды