manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 605

Configuration Guide     581

Configuring Network Security

DHCP Snooping Configuration

Switch(config)#ip dhcp snooping vlan 

5

Switch(config)#show ip dhcp snooping

Global Status: Enable

 VLAN ID: 5

Switch(config-if)#end

Switch#copy running-config startup-config

3.2.2  Configuring DHCP Snooping on Ports

Follow these steps to configure DHCP Snooping on the specified ports.

Step 1

configure

Enter global configuration mode.

Step 2

interface {

 

fastEthernet 

port 

|

 

range fastEthernet 

port-list 

| 

gigabitEthernet

 port

 | 

range

 

gigabitEthernet

 port-list 

| 

interface port-channel

 port-channel-id

 | 

interface range

 

port-

channel 

port-channel-id-list 

}

Enter interface configuration mode.

Step 3

ip dhcp snooping trust

Set the port that is connected to the DHCP server as a trusted port. The switch can forward 

the DHCP packets on the trusted port and discard the DHCP response packets on the 

distrusted port, so as to ensure that users get proper IP addresses from the legal DHCP 

server.

Step 4

ip dhcp snooping mac-verify

Enable the MAC Verify feature. There are two fields in the DHCP packet that contain the 

MAC address of the host. The MAC Verify feature compares the two fields of a DHCP 

packet and discards the packet if the two fields are different. This prevents the IP address 

resource on the DHCP server from being exhausted by forged MAC addresses.

Step 5

ip dhcp snooping limit rate 

value

Enable the limit rate feature and specify the maximum number of DHCP messages that can 

be forwarded on the port per second. The excessive DHCP packets will be discarded. 

value: 

Specify the limit rate value. The following options are provided: 0, 5,10,15,20,25 and 

30 (packets/second). The default value is 0, which indicates disabling limit rate.

Step 6

ip dhcp snooping decline rate 

value

Enable the decline protect feature and specify the maximum number of Decline packets 

can be forwarded per second on the port. The excessive DHCP Decline packets will be 

discarded.

value: 

Specify the limit rate value of Decline packets. The following options are provided: 0, 

5,10,15,20,25 and 30 (packets/second). The default value is 0, which indicates disabling this 

feature.

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды