manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 397

Configuration Guide  

  373

Configuring Layer 2 Multicast

Configuring MLD Snooping

3.1.4  Configuring the Multicast VLAN

In old multicast transmission mode, when users in different VLANs apply for data from 

the same multicast group, the Layer 3 device will duplicate this multicast data and deliver 

copies to the Layer 2 devices. 
With Multicast VLAN configured, all multicast group members will be added to a VLAN. 

Layer 3 device only need to send one piece of multicast data to a Layer 2 device, and the 

Layer 2 device will send the data to all member ports of the VLAN. In this way, Multicast 

VLAN saves bandwidth and reduces network load of Layer 3 devices.
Choose the menu 

Multicast > MLD Snooping > Multicast VLAN

 to load the following page. 

Figure 3-4 

Multicast VLAN Config

Creating Multicast VLAN and Configuring Basic Settings

In the Multicast VLAN section, follow these steps to enable Multicast VLAN and to finish the 

basic settings:
1)  Set up the VLAN that the router ports and the member ports are in. For details, please 

refer to 

Configuring 802.1Q VLAN

.

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды