manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 596

Configuration Guide     572

Configuring Network Security

IP-MAC Binding Configurations

Host Name

Enter the host name for identification.

IP Address

Enter the IP address.

MAC Address

Enter the MAC address.

VLAN ID

Enter the VLAN ID.

2)  Select protect type for the entry.

Protect Type

Select the protect type for the entry:

None

: This entry will not be applied to any feature.

ARP Detection

: This entry will be applied to the ARP Detection feature.

3)  Select the port that is connected to this host.
4)  Click 

Bind

.

2.1.2  Binding Entries Dynamically

The binding entries can be dynamically learned from ARP Scanning and DHCP Snooping.

 

ARP Scanning

With ARP Scanning, the switch sends the ARP request packets of the specified IP field to 
the hosts. Upon receiving the ARP reply packet, the switch can get the IP address, MAC 
address, VLAN ID and the connected port number of the host. You can bind these entries 
conveniently.

Choose the menu 

Network Security > IP-MAC Binding > ARP Scanning

 to load the 

following page.

Figure 2-2 

ARP Scanning

Follow these steps to configure IP-MAC Binding via ARP scanning:
1)  In the 

Scanning Option

 section, specify an IP address range and a VLAN ID. Then click 

Scan

 to scan the entries in the specified IP address range and VLAN.

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды