![background image](http://html1.mh-extra.com/html/tp-link/t2500g-10mps/t2500g-10mps_user-manual_1145700740.webp)
Configuration Guide
716
Configuring Maintenance
Diagnosing the Network
5.2.2 Configuring the Tracert Test
On privileged EXEC mode or any other configuration mode, you can use the following
command to test the connectivity between the switch and routers along the path from the
source to the destination:
tracert
[ ip | ipv6 ]
ip_addr
[
maxHops
]
Test the connectivity of the gateways along the path from the source to the destination.
ip:
The type of the IP address for tracert test should be IPv4.
ipv6:
The type of the IP address for tracert test should be IPv6.
ip_addr:
Enter the IP address of the destination device. If the parameter ip/ipv6 is not selected, both IPv4
and IPv6 addresses are supported, such as 192.168.0.100 or fe80::1234.
maxHops
: Specify the maximum number of the route hops the test data can pass though. The range is 1 to
30 hops; the default is 4 hops.
The following example shows how to test the connectivity between the switch and the
network device with the IP address 192.168.0.100. Set the maxhops as 2:
Switch#tracert
192.168.0.100 2
Tracing route to 192.168.0.100 over a maximum of 2 hops
1 8 ms 1 ms 2 ms 192.168.1.1
2 2 ms 2 ms 2 ms 192.168.0.100
Trace complete.
Содержание T2500G-10MPS
