TP-Link T2500G-10MPS, Руководство пользователя

Страница: 577 / 804

Configuring ACL ACL Configuration
Configuration Guide 553
Switch(config)#end
Switch#copy running-config startup-config
2.2.4 ACL Binding and Policy Binding
You can select ACL binding or Policy binding according to your needs. An ACL Rule and
policy takes effect only after they are bound to a port or VLAN.

Policy Binding
You can bind the policy to a port or a VLAN, then the received packets will be matched and
operated based on the policy.
Step 1 configure
Enter global configuration mode
Step 2 interface { fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
|
range gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
}
access-list bind policy-name
(Optional) Enter layer 2 interface configuration mode and bind the policy to the port.
port
: The port to which the policy will bind.
policy-name
: The name of the policy.
interface vlan
vlan-id
access-list bind policy-name
(Optional) Enter layer 3 interface configuration mode and bind the policy to the VLAN.
Note : Packet Content ACLs cannot be bound to any VLANs.
vlan-id
: The VLAN to which the policy will bind.
policy-name : The name of the policy.
Step 3 end
Return to privileged EXEC mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to bind policy 1 to port 2 and policy 2 to VLAN 2:
Switch#configure
Switch(config)#interface gigabitEthernet
1/0/2
Switch(config-if)#access-list bind 1
Switch(config-if)#exit