TP-Link T2500G-10MPS, Руководство пользователя

Страница: 453 / 804

Configuration Guide 429
Configuring Layer 2 Multicast Configuration Examples
Switch(config-if-range)#exit
5) For port 1/0/4, set the link type as General, and the PVID as 10. Then add the ports to
VLAN 10 as tagged ports.
Switch(config)#interface gigabitEthernet 1/0/4
Switch(config-if)#switchport mode general
Switch(config-if)#switchport pvid 10
Switch(config-if)#switchport general allowed vlan 10 tagged
Switch(config-if)#exit
6) Enable IGMP Snooping in VLAN 10.
Switch(config)#ip igmp snooping vlan-config 10
7) Create Profile 1, configure the mode as permit, and add an IP range with both start IP
and end IP being 225.0.0.1.
Switch(config)#ip igmp profile 1
Switch(config-igmp-profile)#permit
Switch(config-igmp-profile)#range 225.0.0.1 225.0.0.1
Switch(config-igmp-profile)#exit
8) Bind Profile 1 to Port 1/0/2 and Port 1/10/3.
Switch(config)#interface range gigabitEthernet 1/0/2-3
Switch(config-if-range)#ip igmp filter 1
Switch(config-if-range)#exit
9) Create Profile 2, configure the mode as deny, and add an IP range with both start IP and
end IP being 225.0.0.2.
Switch(config)#ip igmp profile 2
Switch(config-igmp-profile)#deny
Switch(config-igmp-profile)#range 225.0.0.2 225.0.0.2
Switch(config-igmp-profile)#exit
10) Bind Profile 2 to Port 1/0/1.
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#ip igmp filter 2
Switch(config-if)#exit
11) Save the settings.
Switch(config)#end