TP-Link T2500G-10MPS, Руководство пользователя

Страница: 791 / 804

Configuring SNMP & RMON Configuration Example
Configuration Guide 767
statistics entry ID as 2 (bound to port 1/0/2). Other configurations are the same as
those of entry 1.
Figure 6-11 Alarm Configuration
5) Click Save Config to save settings.
6.5 Using the CLI

Configuring Rate Limit on ports
Configure the rate limit on required ports. For detailed configuration, please refer to
Configuring QoS
.

Configuring SNMP
1) Enable SNMP and specify the remote engine ID.
Switch#configure
Switch(config)#snmp-server
Switch(config)#snmp-server engineID remote 123456789a
2) Create a view with the name View; set the MIB Object ID as 1 (which represents all
functions), and the view type as Include.
Switch(config)#snmp-server view View 1 include
3) Create a group of SNMPv3 with the name of nms-monitor. Enable Auth Mode and
Privacy Mode, and set the view as read View and notify view.
Switch(config)#snmp-server group nms-monitor smode v3 slev authPriv read View
notify View
4) Create an SNMP user with the name admin. Set the user as a remote user and configure
the security mode and security level based on the group. Set the Auth Mode as SHA
algorithm, password as 1234, the Privacy Mode as DES, and password as 1234.
Switch(config)#snmp-server user admin remote nms-monitor smode v3 slev authPriv
cmode SHA cpwd 1234 emode DES epwd 1234