manualshive.com logo in svg

TP-Link T2500G-10MPS, Руководство пользователя

Поделиться
Скачать
TP-Link T2500G-10MPS Скачать руководство пользователя страница 102

Configuration Guide  

  78

Managing Physical Interfaces

Basic Parameters Configurations

Step 3

Configure basic parameters for the port:

description 

string

Give a port description for identification.

string

: 

Content of a port description, ranging from 1 to 16 characters.

shutdown

no shutdown

Use 

shutdown

 to disable the port, and use 

no shutdown

 to enable the port. When the 

status is enabled, the port can forward packets normally, otherwise it will discard the 

received packets. By default, all ports are enabled.

speed {

 10 | 100 | 1000 | auto

 }

Set the appropriate speed mode for the port.

10 | 100 | 1000 | auto

: 

Speed mode of the port. The options are subject to your actual 

product. The device connected to the port should be in the same speed and duplex 

mode with the port. When auto is selected, the speed mode will be determined by auto 

negotiation.

duplex { 

auto | full | half

 }

Set the appropriate duplex mode for the port.

auto | full | half:

 

Duplex mode of the port. The device connected to the port should be in the 

same speed and duplex mode with the port. When auto is selected, the duplex mode will be 

determined by auto negotiation.

flow-control

Enable the switch to synchronize the data transmission speed with the peer device, 

avoiding the packet loss caused by congestion. By default, this feature is disabled.

jumbo-size 

size

Change the MTU (Maximum Transmission Unit) size on the port to support jumbo frames. 

The default MTU size for frames received and sent on all ports is 1518 bytes. For the port 

with Jumbo enabled, the MTU size is up to 9216 bytes, thus allowing the port to send jumbo 

frames.

Step 4

show interface configuration [ fastEthernet 

port

 | gigabitEthernet 

port

 | 

port-channel 

port-channel-id 

]

Verify the configuration of the port or LAG.

Step 5

end

Return to privileged EXEC mode.

Step 6

copy running-config startup-config

Save the settings in the configuration file.

The following example shows how to implement the basic configurations of port1/0/1, 

including setting a description for the port, making the port autonegotiate speed and 

duplex with the neighboring port, and enabling the flow-control and jumbo feature:

Switch#configure

Содержание T2500G-10MPS





































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды